SCHOOL OF CHEMICAL ENGINEERING
1. W. Gao* and Y. Shao. Freeze concentration for removal of pharmaceutically active compounds in water. Desalination 2009, 249(1), 398-402.
2. Y. Shao, C. Xu*, J. Zhu, F. Preto, J. Wang, G. Tourigny, C. Badour and H. Li. Ash deposition during co-firing biomass and coal in a fluidized-bed combustor. Energy & Fuels 2010, 24(9), 4681-4688.
3. Y. Shao, J. Wang*, C. Xu*, J. Zhu, F. Preto, G. Tourigny, C. Badour and H. Li. An experimental and modeling study of ash deposition behavior for co-firing peat with lignite. Applied Energy 2011, 88, 2635-2640.
4. Y. Shao, C. Xu*, J. Zhu, F. Preto, J. Wang, H. Li and C. Badour. Ash Deposition in Co-firing Three-Fuel Blends Consisting of Woody Biomass, Peat, and Lignite in a Pilot-Scale Fluidized-Bed Reactor. Energy & Fuels 2011, 25, 2841-2849.
5. Y. Shao, C. Xu*, J. Zhu, F. Preto, J. Wang, G. Tourigny, C. Badour and H. Li. Ash and chlorine deposition during co-combustion of lignite and a chlorine-rich Canadian peat in a fluidized bed - Effects of blending ratio, moisture content and sulfur addition. Fuel 2011, 95, 25-34.
6. C, Badour, A, Gilbert*, C, Xu, H, Li, Y. Shao, G. Tourigny and F. Preto. Combustion and air emissions from co-firing a wood biomass, a Canadian peat and a Canadian lignite coal in a bubbling fluidized bed combustor. The Canadian Journal of Chemical Engineering 2011, 90(5), 1170-1177.
7. S. Hurley, C. Xu*, F. Preto, Y. Shao, H.Li, J. Wang and G. Tourigny. Catalyst gasification of woody biomass in an air-blown fluidized-bed reactor using Canadian limonite iron ore as the bed material. Fuel 2012, 91, 170-175.
8. Y. Shao, J. Wang, F. Preto, J. Zhu and C. Xu*. Ash deposition in biomass combustion or co-firing for power/heat generation. Energies 2012, 5, 5171-5189.
9. W. Li, K. Yu, X. Yuan*, J. Zhu, B. Liu, Y Shao, An anisotropic Reynolds mass flux model for the simulation of chemical reaction in gas-particle CFB risers. Chemical Engineering Science 2015, 135, 117-127.
10. L. Wang, M. Li, Y Shao, G. Nakhla. Effects of bioparticle circulation rate on the performance of circulating fluidized bed biofilm reactor. Technology of Water Treatment 2018, 44(8), 61-65.
11. C. Zhang, R. Sabouni, Y. Shao, H.G. Gomaa*, Performance of submerged oscillatory membrane photoreactor for water treatment. Journal of Environmental Chemical Engineering 2017, 3330-3336.
12. H. Wang, M. Kim, K. Li, Y. Shao, J. Zhu, G. Nakhla*. Effective partial nitrification of ammonia in a fluidized bed bioreactor. Environmental Technology 2019, 40(1), 94-101.
13. W. Li, Y. Zhang, Y. Shao*, J. Zhu. A rigorous model for the simulation of chemical reaction in gas-particle bubbling fluidized bed: I. Modeling and validation. Powder Technology 2018, 327, 399-407.
14. W. Li, Y. Shao*, J. Zhu. Anisotropic Turbulent Mass Transfer Model and Its Application to a Gas-Particle Bubbling Fluidized Bed, Industrial & Engineering Chemistry Research 2018, 57, 1671-1678.
15. W. Li, K. Yu, X. Yuan, Y. Shao*, J. Zhu. Simulation of chemical reaction process ingas-particle CFB downers by anisotropic turbulent mass transfer model, Chemical Engineering Research and Design 2018, 132, 452-459.
16. Y. Zhang, W. Li *, Y. Shao, J. Zhu. A rigorous model for the simulation of chemical reaction in gas-particle bubbling fluidized bed: II. Application to gas combustion case, Powder Technology 2018, 327, 392-398.
17. Y. Shao, D. Meng, C. . Xu*, F. Preto, J. Zhu. Ash deposition in air-blown gasification of peat and woody biomass in a fluidized-bed gasifier. Energy Fuels 2018, 32 (6), 6788–6796.
18. T. Shi, M. Krantz, Y. Shao, H. Zhang, H. Zhang*, J. Zhu. Characterization Techniques for Determining Flow Property of Powder in Powder Coating Process, Paint & Coatings Industry 2017, 47(7), 58-65.
19. B. Zheng, H. Zhang, Y. Shao*, J. Zhu. Research Progress in Ultrafine Powder Coatings, Paint&Coatings Industry 2017, 47(8), 76-82.
20. W. Li, Y. Shao, J. Zhu, H. Zhang*, H. Zhang. Reducing Comminution over-grinding of Powder Coatings with Modified Grinding Pins in an Air Classifier Mill, Powder Technology 2019, 344, 36-45.
21. S. Chen, Y. Shao, K. Ma*, J. Zhu*. Development and applications of liquid-solid circulating fluidized beds-Process integration and intensification. Chemical Industry and Engineering Progress 2019, 38(1), 122-135.
22. J. Luo, W. Li, Y. Shao*, G. Nakhla, J. Zhu. Method for determining the hydraulic-retention time and operating conditions of a circulating-fluidized-bed bioreactor with composition disturbances, Industrial & Engineering Chemistry Research 2019, 58, 2113-2124.
23. W. Li, D. Cárdenas Franco, M. Yang, X. Zhu, H.P. Zhang, Y. Shao, H. Zhang*, J. Zhu. Investigation of the performance of ATH powders in organic powder coatings, Coatings 2019, 9(2), 110.
24. W. Li, D. Cárdenas Franco, M. Yang, X. Zhu, H.P. Zhang, Y. Shao, H. Zhang*, J. Zhu. Comparative Study of the Performances of Al(OH)3and BaSO4 in Ultrafine Powder Coatings, Processes 2019, 7(5), 316-334.
25. J. Zhu, D. Meng, Y. Shao*, Y. Zhang. Study on start-up strategy of aerobic inverse fluidized bed bioreactor, Advanced Engineering Sciences 2019, 51(6), 1-9.
26. K. Xu, M. Han, H.P. Zhang, J. Zhu, Y. Shao*. Study on flow behaviors of group C particles blended with nano additive. Journal of Chemical Engineering of Chinese Universities 2019, 33(6), 1361-1368.
27. J. Wang, Y. Shao*, X. Yan, J. Zhu*, Review of (gas)-liquid-solid circulating fluidized beds as biochemical and environmental reactors, Chemical Engineering Journal 2020, 386, 1-22.
28. K. Ma, X. Sun, Y. Shao*, M. Liu, J. Zhu*. Hydrodynamic characteristics of bubble-induced three-phase inverse fluidized bed (BIFB), Chemical Engineering Science 2019, 209.
29. P. Yan, X. Li, H. Li, Y. Shao, H. Zhang, X. Gao*. Hydrodynamics and mechanism of hydrophobic foam column tray: contact angle hysteresis effect, AIChE 2020, 66(1).
30. Y. Zhang, Y. Zhou, J. Liu, Y. Shao*, J. Zhu*. Performance enhancement of fluidized bed catalytic reactor by going to finer particles, Industrial & Engineering Chemistry Research 2019, 58, 20173-20178.
31. Y. Zhou, H. Ding, J. Zhu*, Y. Shao. The effect of gas properties on group C+ fluidized bed reactor, Chemical Engineering Journal 2020. In Press.
32. K. Ma, M. Liu, S. Chen, Y. Shao*, J. Zhu*. The axial and radical phase holdup distribution of bubble-induced three-phase inverse fluidized bed, Chemical Engineering Science 2020, 219.
33. W. Liu, H.P. Zhang, Y. Shao, H. Zhang*, J. Zhu. Preparation of Aluminium Metallic Pigmented Powder Coatings with High Color Stability Using A Novel Method: Microwave Bonding, Progress in Organic Coatings 2020, 147.
34. W. Liu, J. Fu, H.P. Zhang, Y. Shao, H. Zhang*, J. Zhu. Cold Bonding Method for Metallic Powder Coatings, Materials 2018, 11(11).
35. J. Cui, R. Yeasmin, Y. Shao, H.P. Zhang*, H. Zhang*, J. Zhu. Fabrication of Ag+, Cu2+, and Zn2+ Ternary Ion-Exchanged Zeolite as an Antimicrobial Agent in Powder Coating, Industrial & Engineering Chemistry Research 2020, 59(2), 751-762.
36. H. Zhang, Z. Sun, M. Zhang, Y. Shao*, J. Zhu*. Comparison of the flow structures and regime transitions between a cylindrical fluidized bed and a square fluidized bed, Powder Technology 2020, 376, 507-516.
37. H. Zhang, Z. Sun, C. Liu, S. Dong,Y. Shao*, J. Zhu*. The effects of internals and distributors on the distribution and growth of bubbles in the conventional gas-solids fluidized bed. Particuology 2021, 55, pp1-15.
38. L. Wang, J. Zhu*, G. Nakhla, Y. Shao, The hydrodynamics of liquid-solid and gas-liuid-solid inverse fluidized beds with bioparticles, Advanced Powder Technology 2020. Accept..
39. J. Xie, H.P. Zhang, Y. Shao, D. Bao, H. Zhang* and J. Zhu. Investigation of the performance of fumed silica as flow additive in polyester powder coatings. Coatings 2020, 10, 977.
40. Y. Bai, H.P. Zhang*, Y Shao, H. Zhang* and J. Zhu. Recent progresses of superhydrophobic coatings in different application fields: an overview. Coatings 2021, 11, 116.
41. H. Du, Y. Zhou, D. Zhao, Y. Shao, Jesse Zhu*. Fluidization stability vs. powder history of Geldart group C+ particles, Powder Technology 2021, 384,423-430.
C1. Y. Shao, J. Zhu, F. Preto, G. Tourigny, J. Wang, C. Badour, H. Li and C. Xu: Characterizations of deposited ash during co-firing of white pine and lignite in fluidized bed combustor. In: Proceedings of the 20th international conference on fluidized bed combustion-2009, Xian, China, May 18-20, 2009, Part 7: 1041-1047, DOI: 10.1007/978-3-642-02682-9_162. 2010.
C2. Y. Shao, J. Zhu, F. Preto, G. Tourigny, J. Wang, C. Badour, H. Li, and C. Xu : Characterizations of deposited ash during co-firing of peat and lignite in fluidized bed combustor. In: Proceedings of IASTED International Conference Environmental Management and Engineering (EME 2009), Banff, Canada, July 7-8, 2009.
C3. S. Hurley, Y. Shao, F. Preto, G. Tourigny, H. Li and C. Xu: Catalytic gasification of biomass in a pilot-scale fluidized bed reactor. In: Proceedings of The 2nd Annual Particle Technology Research Centre Conference, London, Canada, July 9-10, 2009.
C4. Y. Shao, C. Xu, F. Preto, G. Tourigny, H. Li, J. Wang and J. Zhu: Ash deposition in co-firing biomass/peat and coal in fluidized bed. In: Proceeding of the 8th world congress of chemical engineering (WCCE8) , Montreal, Canada , August 23-27, 2009.
C5. C. Xu, S. Hurley, Y. Shao, H. Li, G. Tourigny and F. Preto: Catalytic gasification of pinewood sawdust and peat in a pilot-scale air-blown fluidized bed gasifier. In: Proceedings of AIChE 2010 Spring Meeting & 6th Global Congress on Process Safety, San Antonio, U.S.A., March 21-25, 2010.
C. Xu, Y. Shao, Z. Yuan, S. Cheng, S. Feng, L. Nazari, M. Tymchyshyn. Hydrothermal Liquefaction of Biomass in Hot-compressed Water, Alcohols and Alcohol-Water Co-Solvents for Bio-crude Production. Applications of Hydrothermal Reactions to Biomass Conversion. Ed. F. Jin. Springe--Verlag, Berlin, 2013 .